OKY8005: SG5010 Torque Coreless Servo 180 Degrees
OKY8005: SG5010 Torque Coreless Servo 180 Degrees
Size: about 41mm x 40mm x 19.5mm
Connecting Line: about 280mm
Reaction Speed: 0.13sec – 0.17sec/60°
Stall Torque: 8kg/cm (4.8V) and 11kg/cm (6.0V)
Operating Temperature: -30°C to +60°C
Rotation Angle: 180°
Working Current: 100mA
Using Voltage: 3.5V ~ 8.4V
Additional information
| Size | 41mm x 40mm x 19.5mm |
|---|---|
| Connecting Line | 280mm |
| Reaction Speed | 0.13sec – 0.17sec/60° |
| Stall Torque | 8kg/cm (4.8V) and 11kg/cm (6.0V) |
| Operating Temperature | -30°C to +60°C |
| Rotation Angle | 180° |
| Working Current | 100mA |
| Using Voltage | 3.5V ~ 8.4V |
Related Products
OKY3436: Rain Detection Module Moisture for Arduino STM32
OKY3436: Rain Detection Module Moisture for Arduino STM32
OKY3436: Rain Detection Module Moisture for Arduino STM32
OKY3436: Rain Detection Module Moisture for Arduino STM32LED lamp power light, the output signal. TTL level output, TTL output signal for low level effectively.
Ability to drive about 100ma, can be directly driven relay, buzzer. small fan, and so on.
Sensitivity can be adjusted through the potentiometer.
Raindrops board and control board are separated, convenient to wire leads.
The raindrops plates of large area, more conductive to detect the rain.
OKY4032: 2.8 Inch TFT LCD Shield Touch Panel Module TF SD for Arduino UNO R3, MEGA 2560
OKY4032: 2.8 Inch TFT LCD Shield Touch Panel Module TF SD for Arduino UNO R3, MEGA 2560
OKY4032: 2.8 Inch TFT LCD Shield Touch Panel Module TF SD for Arduino UNO R3, MEGA 2560
OKY4032: 2.8 Inch TFT LCD Shield Touch Panel Module TF SD for Arduino UNO R3, MEGA 2560ILI9325 touch panel controller
PCB adapter for LCD
One SD card socket
2 x 20 pin 2.54mm double row pin header interface for connecting MCU
Can be derived by 8051 / AVR / PIC and other low power controllers
OKY3016: 5V/12V 16 Channel Relay Module with Optocoupler (Blue Board)
OKY3016: 5V/12V 16 Channel Relay Module with Optocoupler (Blue Board)
OKY3016: 5V/12V 16 Channel Relay Module with Optocoupler (Blue Board)
OKY3016: 5V/12V 16 Channel Relay Module with Optocoupler (Blue Board)12V 4-Channel Relay interface board, able to control various appliances and other equipment with large current.
Can be directly controlled by micro-controller (Arduino, 8051, AVR1 PIC, DSP, MSP430, TTL logic).
Equipped with high-current relay, AC250V 10A; DC30V 10A
Indication LED’s for relay output status
12V 16-Channel Relay interface board, each one needs 50-60mA Driver Current
OKY2014: Esplora for Arduino
OKY2014: Esplora for ArduinoArduino DIY is used for toys and science kits for kids, and steam kits for high school, primary school, and secondary school.
Reviews
There are no reviews yet.