OKY8003-1: SG90 360 Degrees 9G Micro Servo Motor Tower Pro
OKY8003-1: SG90 360 Degrees 9G Micro Servo Motor Tower Pro
Weight: 9g
Size: 23mm x 12.2mm x 29mm
No-load Operating Speed: 0.12 seconds/60° (4.8V); 0.10 seconds/60° (6.0V)
Torque: 1.6kg (4.8V)
Operating Temperature: -30°C to +60°C
Dead Zone Settings: 5 microseconds
Operating Voltage: 3.5V ~ 6V
Cable Length: 25cm
Additional information
| Function | For boat/car/plane/helicopter/robot |
|---|---|
| Servo | Analog servo |
| Structural Material | Copper metal teeth, coreless motor, double ball bearing |
| Attachment Contains | helm, 30cm line, fixing screws, damping pouches, aluminum sets and other accessories |
| Scope | Small and medium-sized electric model aircraft and model |
Related Products
OKY3446: Water Level Sensor Depth of Detection for Arduino
OKY3446: Water Level Sensor Depth of Detection for Arduino
OKY3446: Water Level Sensor Depth of Detection for Arduino
OKY3446: Water Level Sensor Depth of Detection for ArduinoVoltage: DC 3V ~ 5V
Operating Current: less than 20mA
Sensor Type: Analog
Detection Area: 40mm x 16mm
Production Process: FR4 double-sided HASL
Size: 62mm x 20mm x 8mm
OKY0254: Two 18650 Batteries Storage Box Holder
OKY0254: Two 18650 Batteries Storage Box Holder
OKY0254: Two 18650 Batteries Storage Box Holder
OKY0254: Two 18650 Batteries Storage Box HolderDouble 15CM exposed wire battery box.
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for ArduinoOn-board TTP226 capacitive 8-button touch-sensing IC.
On-board 8-channel level status indicator.
The module can set the output, key output mode, maximum output time and fast/low power selection.
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USBThis module is a micro-controller board based on the Atmega32U4. Simply connect it to a computer with a USB cable or power it with a battery to get started.
Reviews
There are no reviews yet.