OKY3432-1: PS2 Game Joystick Axis Sensor Module for Arduino AVR PIC
OKY3432-1: PS2 Game Joystick Axis Sensor Module for Arduino AVR PIC
X, Y-axis output for the 2 potentiometer, you can read through the AD conversion twist angle.
Press the joystick down, you can send all the way to touch the switch, for the digital output, has been pulled.
Applicable to two-degree-of-freedom steering gear PTZ control or other remote control proportional control.
On-board two rocker modules, suitable for mobile platform control board development and experiment.
Additional information
| Size | 91mm x 51mm x 32mm |
|---|---|
| Fixed Hole | 3mm |
| Hole | 2000 x 1600mil (50.8mm x 40.64mm) |
| Voltage | 3.3V, 5V |
| Port | Each rocker 2 analog voltage 1 digital level |
| Platform | Arduino, Single Chip, ARM, Raspberry Pi |
Related Products
OKY8005-2: SG5010 Torque Coreless Servo 360 Degrees
OKY8005-2: SG5010 Torque Coreless Servo 360 Degrees
OKY8005-2: SG5010 Torque Coreless Servo 360 Degrees
OKY8005-2: SG5010 Torque Coreless Servo 360 DegreesSize: about 41mm x 40mm x 19.5mm
Connecting Line: about 280mm
Material: ABS plastic
Reaction Speed: 0.13sec – 0.17sec/60°
Stall Torque: 8kg/cm (4.8V) and 11kg/cm (6.0V)
Operating Temperature: -30°C to +60°C
Rotation Angle: 180°
Working Current: 100mA
Using Voltage: 3.5V ~ 8.4V
Structural Material: Metal gear, pull 3kg
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower Pro
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower Pro
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower Pro
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower ProWeight: 9g
Size: 23mm x 12.2mm x 29mm
No-load Operating Speed: 0.12 seconds/60° (4.8V); 0.10 seconds/60° (6.0V)
Torque: 1.6kg (4.8V)
Operating Temperature: -30°C to +60°C
Dead Zone Settings: 5 microseconds
Operating Voltage: 3.5V ~ 6V
Cable Length: 25cm
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USBThis module is a micro-controller board based on the Atmega32U4. Simply connect it to a computer with a USB cable or power it with a battery to get started.
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for Arduino
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for Arduino
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for Arduino
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for ArduinoDisplay common anode for the four red LED
Digital tube 8 gray adjustable
Level control interface for 5V or 3.3V
4 M2 screws positioning holes for easy installation
Reviews
There are no reviews yet.