OKY3396: DS3234 Real-Time Clock Module RST Input/Output for Arduino Uno
OKY3396: DS3234 Real-Time Clock Module RST Input/Output for Arduino Uno
Battery backup input for continuous timekeeping
Real-time clock counts seconds/minutes/hours/day/month/year with leap year, compensation valid up to 2099
Two timw-of-day alarms
Programmable square-wave output
4MHz SPI Bus supports modes 1 and 3
Additional information
| Dimensions | 20mm x 20mm x 10mm |
|---|---|
| Output Type | SPI |
| Battery Type | CR1225 Battery |
| Input Voltage | 5V DC |
| Commercial Operating Temperature | 0°C to +70°C (accuracy ±2ppm from 0°C to 40°C) |
| Industrial Operating Temperature | -40°C to +85°C (accuracy ±3.5ppm from -40°C to 85°C) |
| Digital Temp Sensor Output | ±3°C accuracy |
Related Products
OKY3464: LM386 Audio Amplifier Module
OKY3464: LM386 Audio Amplifier ModuleLow static consumption, the quiescent current of approximately 2mA, ideal for battery-powered.
Very few external components
The board default gain of 200
Low distortion
On-board volume control potentiometer clockwise to increase the volume
With power indicator light
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for ArduinoOn-board TTP226 capacitive 8-button touch-sensing IC.
On-board 8-channel level status indicator.
The module can set the output, key output mode, maximum output time and fast/low power selection.
OKY4016: 2.8 Inch Screen for Raspberry Pi
OKY4016: 2.8 Inch Screen for Raspberry PiThis product is compatible with Raspberry Pi paragraphs B+ motherboard and Raspberry Pi B motherboard. B+ insert method to insert method compatible with B, B+ 1 foot GPIO, corresponding paragraph B GPIO1 foot.
OKY2006-1: CH340G nano V3.0 R3 Board
OKY2006-1: CH340G nano V3.0 R3 BoardCH340G Micro-controller can be used to replace FT 232RL
Uses Atmel Atmega328P-AU MCU
A boot loader is installed
Supports USB download and power
Supports external 5V ~ 12V DC power supply
Supports 9V battery power supply
Nano board can be used to connect to the internet with the Ethernet Shield
Works as server or client
Comes with efficient library and examples
direct plug puzzle board, no soldering needed
Reviews
There are no reviews yet.