OKY3131: Sound Detection Sensor Module
OKY3131: Sound Detection Sensor Module
Signal output indication
Single channel signal output
The output effective signal is low level
The signal lights when there is sound
Can be used for Acoustic control light
Additional information
| Main Chip | LM393 |
|---|---|
| Operating Voltage | 3.3V ~ 5V |
| Small PCB Board Size | 3.2cm x 1.7cm |
| Weight | 4g |
Related Products
OKY3464: LM386 Audio Amplifier Module
OKY3464: LM386 Audio Amplifier ModuleLow static consumption, the quiescent current of approximately 2mA, ideal for battery-powered.
Very few external components
The board default gain of 200
Low distortion
On-board volume control potentiometer clockwise to increase the volume
With power indicator light
OKY8005: SG5010 Torque Coreless Servo 180 Degrees
OKY8005: SG5010 Torque Coreless Servo 180 Degrees
OKY8005: SG5010 Torque Coreless Servo 180 Degrees
OKY8005: SG5010 Torque Coreless Servo 180 DegreesSize: about 41mm x 40mm x 19.5mm
Connecting Line: about 280mm
Reaction Speed: 0.13sec – 0.17sec/60°
Stall Torque: 8kg/cm (4.8V) and 11kg/cm (6.0V)
Operating Temperature: -30°C to +60°C
Rotation Angle: 180°
Working Current: 100mA
Using Voltage: 3.5V ~ 8.4V
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for ArduinoOn-board TTP226 capacitive 8-button touch-sensing IC.
On-board 8-channel level status indicator.
The module can set the output, key output mode, maximum output time and fast/low power selection.
OKY3436: Rain Detection Module Moisture for Arduino STM32
OKY3436: Rain Detection Module Moisture for Arduino STM32
OKY3436: Rain Detection Module Moisture for Arduino STM32
OKY3436: Rain Detection Module Moisture for Arduino STM32LED lamp power light, the output signal. TTL level output, TTL output signal for low level effectively.
Ability to drive about 100ma, can be directly driven relay, buzzer. small fan, and so on.
Sensitivity can be adjusted through the potentiometer.
Raindrops board and control board are separated, convenient to wire leads.
The raindrops plates of large area, more conductive to detect the rain.
Reviews
There are no reviews yet.