OKY3396: DS3234 Real-Time Clock Module RST Input/Output for Arduino Uno
OKY3396: DS3234 Real-Time Clock Module RST Input/Output for Arduino Uno
Battery backup input for continuous timekeeping
Real-time clock counts seconds/minutes/hours/day/month/year with leap year, compensation valid up to 2099
Two timw-of-day alarms
Programmable square-wave output
4MHz SPI Bus supports modes 1 and 3
Additional information
| Dimensions | 20mm x 20mm x 10mm |
|---|---|
| Output Type | SPI |
| Battery Type | CR1225 Battery |
| Input Voltage | 5V DC |
| Commercial Operating Temperature | 0°C to +70°C (accuracy ±2ppm from 0°C to 40°C) |
| Industrial Operating Temperature | -40°C to +85°C (accuracy ±3.5ppm from -40°C to 85°C) |
| Digital Temp Sensor Output | ±3°C accuracy |
Related Products
OKY3440: Mini Magnetic Reed Modules
OKY3440: Mini Magnetic Reed ModulesReed module and the interface comes with digital 13 LED build a sample circuit to produce a Reed warning lamp 13 comes with digital interfaces of the LED, the Reed sensor access number 3 interface, when Reed sensors sensed a key signal LED lights, otherwise off.
OKY3429: Finger Print Module
OKY3429: Finger Print ModuleThe product is composed of optical fingerprint sensor, high speed DSP processor, high performance fingerprint matching algorithm, super large capacity FLASH chip and other hardware and software components. The fingerprint module has the functions of fingerprint collection, fingerprint registration, fingerprint matching and fingerprint search.
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USB
OKY2023: Atmega32U4 Board for LilyPad Arduino USBThis module is a micro-controller board based on the Atmega32U4. Simply connect it to a computer with a USB cable or power it with a battery to get started.
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for Arduino
OKY3422: 8 Channel Capacitive Touch Button Switch Module TTP226 for ArduinoOn-board TTP226 capacitive 8-button touch-sensing IC.
On-board 8-channel level status indicator.
The module can set the output, key output mode, maximum output time and fast/low power selection.
Reviews
There are no reviews yet.