OKY3271-2: Micro Infrared PIR Motion Body Sensor
OKY3271-2: Micro Infrared PIR Motion Body Sensor
Mini IR pyroelectric infrared PIR motion human sensor automatic detector module
Based on the digital intelligent infrared technology
Automatic control
High sensitivity and reliability
Widely used in various auto-sensing electrical equipment
Immunity enhancement, internal use of digital signal processing, direct high-low output
Additional information
| Operating Voltage | DC 2.7V ~ 12V |
|---|---|
| Static Power Consumption | < 0.1mA |
| Delay Time | 2 seconds |
| Block Time | 2 seconds |
| Trigger Mode | Repeatable |
| Sensing Range | ≤ 100° cone angle, 3m-5m (according to the specific lens) |
| Working Temperature | -20°C to +60°C |
| PCB Dimensions | 10mm x 8mm |
| Module Lens | Small lens |
Related Products
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower Pro
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower Pro
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower Pro
OKY8003: SG90 180 Degrees 9G Micro Servo Motor Tower ProWeight: 9g
Size: 23mm x 12.2mm x 29mm
No-load Operating Speed: 0.12 seconds/60° (4.8V); 0.10 seconds/60° (6.0V)
Torque: 1.6kg (4.8V)
Operating Temperature: -30°C to +60°C
Dead Zone Settings: 5 microseconds
Operating Voltage: 3.5V ~ 6V
Cable Length: 25cm
OKY2006-1: CH340G nano V3.0 R3 Board
OKY2006-1: CH340G nano V3.0 R3 BoardCH340G Micro-controller can be used to replace FT 232RL
Uses Atmel Atmega328P-AU MCU
A boot loader is installed
Supports USB download and power
Supports external 5V ~ 12V DC power supply
Supports 9V battery power supply
Nano board can be used to connect to the internet with the Ethernet Shield
Works as server or client
Comes with efficient library and examples
direct plug puzzle board, no soldering needed
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for Arduino
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for Arduino
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for Arduino
OKY4086-1: 4 Bits TM1637 Digital Tube LED Clock Display Module for ArduinoDisplay common anode for the four red LED
Digital tube 8 gray adjustable
Level control interface for 5V or 3.3V
4 M2 screws positioning holes for easy installation
OKY3513: New Tracking Module / Tracking Sensor TCRT5000
OKY3513: New Tracking Module / Tracking Sensor TCRT5000
OKY3513: New Tracking Module / Tracking Sensor TCRT5000
OKY3513: New Tracking Module / Tracking Sensor TCRT5000Adopts TCRT5000 photoelectric sensor and comparator
Easy to use, good stability and anti-interference ability
Perfect for black and white line detection for smart car
Black line for low level output, white line for high level output
Reviews
There are no reviews yet.